Penguin Chillers 1 HP Water Chiller

Before you buy

Still sold, now with a choice of titanium coil or 316 stainless steel shell and coil. Penguin rates it at 10,000 BTU/hr and 37 to 100°F with water.

• Power: 110 to 120V, 7.2 A, 830 W, 6-foot cord.
• Size: 19.25 x 19.75 x 14.25 inches; 58 pounds, or 64 with 316 stainless. 59 dBA.
• Ports: 1-inch female NPT, 3/4-inch on 316 stainless.
• Pump not included. Penguin recommends a Danner Mag Drive 5.0 to 18, or any pump rated under 10 PSI (23 feet of head).
• Indoor use only. Water must flow whenever the chiller is on. Unplug the chiller before you stop the pump.
• Warranty: 1 year included, with paid 2- and 3-year extensions.

The thing to compare: Penguin's 1 HP HE draws the same 7.2 A and 830 W and is rated 11,500 BTU/hr, 1,500 more than this one. Same footprint, same plug. Run your tub through our chiller sizing calculator to see whether either is more than you need.

Penguin 1 HP Water Chiller specifications and Penguin guides and manuals.

NOTE:

• This chiller is not intended for outdoor use. Additionally, please place any set-up using this chiller in area that can withstand wetness, moisture, and/or condensation.
• If you plan to use this chiller for a DIY cold plunge or ice bath, you'll need your own pump, filter, and tubing.
• For a complete water chiller build rated for outdoor use, check out the Penguin Chillers Cold Therapy Chiller. 

The Penguin Chillers 1 HP Water Chiller provides powerful and efficient cooling for various applications, including cold plunge tubs, aquariums, brewing, and more. With 10,000 BTU/hour of cooling capacity, this chiller can effectively lower water temperatures for tanks and systems within its size range.

Key Features:

• 1 HP compressor: 10,000 BTU/hr cooling capacity
• Titanium Heat Exchanger: Prevents copper corrosion to keep water pure. Safe for marine life
• Digital temperature control: Maintain precise temperature
• Quiet operation: only 59 dBA noise output
• Durable steel construction: built to last
• Made in USA: quality workmanship
• Energy efficient: 830 Watts

Convenient Setup

The 1 HP chiller plugs into a standard 110V outlet and draws only 7.2 Amps. The compact size allows flexible positioning. It can pair with a variety of pumps up to 1800 GPH.

Reliable Performance

This chiller provides reliable cooling for hydroponics, marine tanks, research labs, food/beverage production, industrial uses, and more.

Made in USA

Penguin Chillers are engineered and hand-assembled in the USA using high-quality components. Attention to detail and rigorous testing ensure years of trouble-free operation.

Contact Plunge Junkies to learn more about integrating this chiller into your cold plunge setup!