Quick answer

The Plunge All-In Gen 2 is the better cold plunge if you will use it most days and want 37°F water waiting without ice, while the Ice Barrel 500 is the better buy if you want to start for a fraction of the price and can live with ice or add a chiller later. The All-In builds its chiller, ozone and filtration into one 76.75 inch tub. The Ice Barrel 500 is a 94 gallon insulated barrel with no electronics at all until you add the separate 1/2 HP Ice Barrel Chiller. Note that Ice Barrel no longer lists the Ice Barrel 400 on its US site; the 500 is the current full-size model.

At a glance

Plunge

Plunge All-In Gen 2

Self-contained, app-controlled tub with built-in chiller

Type
Chiller-integrated tub
Price tier
Premium
Best for
Daily plungers who want 37°F on demand with nothing to assemble or haul

Choose the Plunge All-In Gen 2 if you plunge most days, have a dedicated 20 amp circuit, and want a set-and-forget 37°F tub with one warranty.

Ice Barrel

Ice Barrel 500

Insulated upright barrel, ice now, chiller later

Type
Insulated upright barrel (ice or add-on chiller)
Price tier
Budget
Best for
Buyers who want to start cold with ice now and add a chiller later

Choose the Ice Barrel 500 if you want an insulated upright barrel at a fraction of the price, and are happy to use ice or add the separate 1/2 HP Chiller later.

These two products sit at opposite ends of the home cold plunge market, which is exactly why people cross-shop them. Plunge sells the All-In as a finished appliance: tub, chiller, pump, ozone and app in one shell, delivered and plugged into the wall. Ice Barrel sells a rugged insulated barrel made in the USA from recycled plastic, and leaves the cooling up to you: bags of ice, or the separate Ice Barrel Chiller it sells as an add-on.

One housekeeping note first. Many buyers still search for the Ice Barrel 400. As of November 14, 2026, Ice Barrel's US site lists only the Ice Barrel 300, the Ice Barrel 500 and the Ice Barrel Chiller, and the old Ice Barrel 400 product link now sends you to the home page. The 400 held 105 gallons and fit users up to 6'6". The 500 is the current full-size model: 94 gallons, built-in steps and a seat, and room for users up to 6'9". This comparison uses the Ice Barrel 500, and calls out where the old 400 differed.

Key differences between Plunge All-In and Ice Barrel

  • Lowest set temperature: Plunge All-In 37 °F, Ice Barrel 37 °F.
  • Water capacity: Plunge All-In 105 gal, Ice Barrel 94 gal.
  • Water change interval: Plunge All-In 180 days, Ice Barrel 28 days.
  • Empty weight: Plunge All-In 238 lb, Ice Barrel 104 lb.
  • Filled weight: Plunge All-In 1,150 lb, Ice Barrel 900 lb.
  • Overall length: Plunge All-In 76.8 in, Ice Barrel 57.6 in.
  • Best for: Plunge All-In: Daily plungers who want 37°F on demand with nothing to assemble or haul. Ice Barrel: Buyers who want to start cold with ice now and add a chiller later.

Plunge All-In vs Ice Barrel by the numbers

Head to head: the numbers that matter

Plunge All-InIce Barrel

Lowest set temperature[1]

Plunge All-In37 °F
Ice Barrel37 °F

Lower is better · Ice Barrel 500 needs the add-on Ice Barrel Chiller to hold a set point; ice alone has no thermostat

Water capacity[2]

Plunge All-In105 gal
Ice Barrel94 gal

Plunge spec page says about 105 gallons; Ice Barrel says 94 gallons (356 liters)

Water change interval[6]

Plunge All-In180 days Edge
Ice Barrel28 days

Higher is better · Plunge: every 6 months with its chemicals (1 to 3 months without). Ice Barrel: every four weeks or as preferred

Empty weight[1]

Plunge All-In238 lb
Ice Barrel104 lb Edge

Lower is better · Ice Barrel figure is the barrel alone; the Chiller adds 65 lb

Filled weight[1]

Plunge All-In1,150 lb
Ice Barrel900 lb Edge

Lower is better · Plan the floor or deck for this load plus a person

Overall length[1]

Plunge All-In76.8 in
Ice Barrel57.6 in Edge

Lower is better · All-In is 31.5 in wide; Ice Barrel 500 is 30.7 in wide before the Chiller

Dedicated circuit required[5]

Plunge All-In20 A
Ice Barrel15 A Edge

Lower is better · Plunge help center: dedicated 20 amp. Ice Barrel Chiller: 115V, 15 A fuse rating. Barrel alone needs no power

Tallest user listed[1]

Plunge All-In81 in
Ice Barrel81 in

Both makers list users up to 6'9"

How cold do bathhouses actually run? (SaunaShare data)

Coldest tub at each of the 65 SaunaShare bathhouses that publish a plunge temperature, out of 403 listings with a cold plunge. Median: 45°F.

Below 40°F9 bathhouses
40 to 44°F15 bathhouses
45 to 49°F25 bathhouses
50°F and up16 bathhouses

Lowest published setting: Plunge All-In 37°F, Ice Barrel 37°F. Most bathhouses run warmer than either floor.

Our scorecard (1 to 5, from published specs and our support history)
CategoryPlunge All-InIce Barrel
Cold on demandThe All-In holds a set point down to 37°F and cools up to 12°F per hour; the Ice Barrel 500 needs ice or a 1/2 HP add-on chiller.5/53/5
Upfront costThe Ice Barrel 500 alone costs a fraction of the All-In, and even the barrel plus Chiller bundle costs less.2/55/5
Footprint and placementThe All-In is 76.75 by 31.5 inches with 16 inches of vent clearance on the equipment end; the Ice Barrel 500 is 57.6 by 30.7 inches and weighs 104 lb empty.3/54/5
WarrantyPlunge gives 1 year on the whole unit with strict voiding rules; Ice Barrel gives a limited lifetime barrel warranty that its own terms cap at 3 years, and 1 year on the Chiller.2/54/5
Water care effortThe All-In has ozone and a monthly filter with water changes every 6 months on Plunge chemicals; Ice Barrel recommends a water change every four weeks.4/53/5
Electrical and setupThe All-In needs a dedicated 20 amp circuit and no extension cord; an ice-fed Ice Barrel needs no power at all, and the Chiller is rated 15 A.3/54/5

Category ratings, not a total: which one wins depends on which rows matter to you.

Plunge All-In Gen 2 vs Ice Barrel 500: full specifications

SpecPlunge All-In Gen 2Ice Barrel 500
What it is[1]Tub with built-in chiller, pump, ozone and appInsulated barrel; cooling by ice or separate Ice Barrel Chiller
Current status (Nov 2026)[13]Gen 2, current flagshipCurrent; replaces the Ice Barrel 400 as the full-size model
Body position[9]Reclined, full lengthUpright, built-in seat and steps
Exterior size[1]76-3/4 x 31-1/2 x 28-3/4 in57.6 L x 30.7 W x 42.1 H in
Water capacity[2]About 105 gal94 gal (356 L)
Weight empty / filled[1]238 lb / 1,150 lb104 lb / 900 lb
Lowest temperature[10]37°F37°F with Ice Barrel Chiller; ice only has no set point
Heating[1]Optional heater, up to 104°FNone (cold only)
Cooling hardware[10]Built-in chiller (0.75 HP on Plunge's chiller lineup page; an older spec page says 1 HP)Separate 1/2 HP Chiller, R290 refrigerant, 65 lb
Insulation[9]Insulated cover; tub R-value not publishedR-16 polyurethane foam in barrel and lid
Sanitation[2]Ozone plus filter (20 micron)Water Stabilizer; filter alerts on the Chiller
Electrical[5]120V, dedicated 20 A circuit, GFCI cord, no extension cordsBarrel: none. Chiller: about 115V, 60Hz, 15 A fuse rating
Vent clearance[3]16 in on the equipment end, 12 in in frontNot published on the product page
Filter change[4]At least every 30 days (warranty condition)Monthly clean or replace (Chiller FAQ)
Water change[6]Every 6 months with Plunge chemicals; 1 to 3 months withoutEvery four weeks or as preferred
Freezing rule[3]Drain and winterize if below 32°F for 12 hoursWeather and ice damage excluded from barrel warranty
Warranty[4]1 year, whole unit, residential onlyLimited lifetime, capped at 3 years (barrel); 1 year (Chiller)
Where it is built[9]Assembled in CaliforniaMade in the USA from recycled materials

Cooling: built-in chiller vs ice or an add-on

This is the real decision. The Plunge All-In Gen 2 has its chiller inside the cabinet. Plunge lists cooling to 37°F at up to 12°F per hour, and says the Gen 2 system cools 31% faster on 50% less energy than Gen 1 (Plunge's own figures, not an independent test). You set a number in the app and the tub holds it.

The Ice Barrel 500 has no cooling of its own. Out of the box you fill it with a hose and add ice. Ice Barrel's FAQ says the R-16 foam walls and lid often hold water around 59°F without a chiller running, which is a manufacturer claim about heat retention, not a cooling spec. To hold 37°F automatically you add the Ice Barrel Chiller, a separate 1/2 HP unit that connects through 3/4 inch chiller ports on the barrel.

Horsepower is murkier than it should be. Plunge's comparison page lists 1 HP for the All-In, but that page also carries older figures (270 lb empty, where the Gen 2 product page says 238 lb), so treat 1 HP as unconfirmed for Gen 2; Plunge's current chiller lineup page lists 0.75 HP. The number Plunge does publish for Gen 2 is the one that matters to you: up to 12°F of cooling per hour. Ice Barrel does not publish a cooling rate for its Chiller.

Do not mix the methods on the Plunge: the Plunge All-In residential warranty lists adding ice to the tub as a condition that voids the warranty. If you want to dump ice in on a hot day, that is an Ice Barrel habit, not an All-In one.

Space, weight and the upright vs reclined question

The All-In is a full-length tub: 76-3/4 inches long, 31-1/2 inches wide and 28-3/4 inches tall, 238 lb empty and about 1,150 lb filled. You lie back with your legs out. The Ice Barrel 500 is an upright barrel: 57.6 inches long, 30.7 inches wide and 42.1 inches tall, 104 lb empty and about 900 lb filled. You sit on the built-in seat with water to your neck.

Both makers list users up to 6'9". The difference is posture and floor area. The barrel covers far less floor and weighs 104 lb empty; the All-In arrives with a delivery crew and stays put.

Wiring and placement

The All-In needs its own circuit. Plunge's current electrical article (updated November 14, 2026) and the residential manual both call for a dedicated 120V, 20 amp circuit, with the supplied GFCI cord and no extension cord, even though the product page still says 15 amp. Plan for 20. The manual also asks for 16 inches of clearance on the equipment end, 12 inches in front for the drain, and the plug at least 6 feet from the water (per the safety precautions).

An ice-fed Ice Barrel 500 needs no electricity at all, which is its quiet superpower for a back corner of the yard. Add the Chiller and you need a 115V outlet; Ice Barrel lists a 15 A fuse rating (maximum overcurrent protection). Put the Chiller in the shade, with room to breathe, because every chiller dumps the heat it pulls from the water into the air around it.

  • Plunge All-In: dedicated 20 A, GFCI, no extension cords, outdoor-rated outlet with an in-use cover if outside.
  • Ice Barrel 500: no power for ice-only use; Chiller on a 15 A protected outlet.

Water care and freezing

Plunge's care guide asks for weekly skimming and water chemistry, a new filter at least monthly, and a water change every 6 months when you use Plunge's recommended chemicals (every 1 to 3 months if you do not). Ozone runs on board. The All-In is meant to run 24/7; stagnant water is called out as a problem.

Ice Barrel recommends changing the water every four weeks or as preferred, with its Water Stabilizer to keep it cleaner longer. The Chiller adds monthly filter cleaning or replacement.

Winter is where the rules get strict. Plunge says to drain and fully winterize the All-In if the air stays below 32°F for 12 hours, and its winterizing guide says the only guaranteed protection is a temperature-controlled room. Ice Barrel's barrel warranty excludes weather damage, including ice, and the Chiller FAQ says to shut it off in freezing outdoor conditions.

Safety: cold water immersion carries real risks, including cold shock and hypothermia. Read our cold plunge dangers page before your first session.

Warranty: read the fine print, not the headline

Ice Barrel's headline is a limited lifetime warranty on the barrel, and its own warranty page says that lifetime is limited to 3 years. The fine print excludes cosmetic fading (the barrel is LLDPE plastic and will fade in direct sun), weather damage, and delamination after the first year. The Chiller carries 1 year, and the Chiller warranty limits Ice Barrel's transportation cost obligations.

Plunge covers the shell, chiller, pump, sensors, controls and plumbing for 1 year, residential use only, with parts and labor included (travel mileage may be charged). The voiding list is long: no app connection or out-of-date firmware, filters older than 30 days, adding ice, freezing without winterizing, and not draining or storing the tub after a power loss of more than 1 hour.

Living with each one: apps, routines and noise

The All-In is designed around the Plunge app. You set temperature, track sessions and get filter reminders there, and Plunge's warranty requires the tub to stay connected with current firmware. Day to day, you can pause the jets for 15 minutes for a quieter session, and the underwater light shuts itself off after 4 hours. Plunge also wants the system running 24/7, because circulation is what keeps the water clean.

The Ice Barrel 500 on ice has no routine beyond lid on, lid off, and topping up ice. Add the Chiller and you get the Ice Barrel app with scheduling, plus what Ice Barrel calls a time-to-temperature engine that adjusts to the weather so the water is ready when you are. The Chiller is a separate box beside the barrel, so plan floor space for both and keep hoses out of the walkway.

Neither maker publishes a decibel rating for these models on the pages we read, so if the plunge will sit under a bedroom window, ask before you buy.

Cost and who should buy which

The Ice Barrel 500 alone is in the Budget tier. Add the Chiller and the pair is still a Mid-tier setup, well below the All-In's Premium list price. What you buy with the difference is integration: one cabinet, one warranty, one app, a chiller rated to 12°F per hour and an optional heater to 104°F.

Ice-only plunging has an ongoing cost the spec sheets do not list: ice, bought or made, every session you want it cold. If you plunge most mornings, plan on adding the Chiller, and compare that bundle with the All-In instead of comparing the bare barrel.

Buy the Plunge All-In Gen 2 if you already know you will plunge four or more mornings a week, you can run a dedicated 20 amp circuit, and you want one product, one app and one warranty call when something goes wrong. The optional heater to 104°F makes it a two-season tub for some households.

Buy the Ice Barrel 500 if you are new to cold water, plunge a few times a week, or want an upright seat in a corner of a patio or garage gym. Start with ice. If you find yourself buying ice most days, add the Ice Barrel Chiller and you still land well below the All-In's price.

If you want an upright plunge with a built-in chiller, do not confuse the Ice Barrel with the Icetubs IceBarrel: that is a different maker and a different product, and we compare the two separately.

The verdict

Which one should you buy?

Choose Plunge All-In if

  • You want 37°F every morning without buying or making ice
  • You also want warm soaks up to 104°F in the same tub
  • You want one integrated system with app control and ozone

Choose Ice Barrel if

  • You want to try cold plunging before committing to a chiller
  • Your spot has no outlet, or you cannot add a dedicated 20 amp circuit
  • You prefer sitting upright in a small footprint

Choose the Plunge All-In Gen 2 if you plunge most days, have a dedicated 20 amp circuit, and want a set-and-forget 37°F tub with one warranty. Choose the Ice Barrel 500 if you want an insulated upright barrel at a fraction of the price, and are happy to use ice or add the separate 1/2 HP Chiller later.

FAQ

Is the Plunge All-In better than the Ice Barrel?

The Plunge All-In Gen 2 is better for daily users who want automatic cold, because its built-in chiller holds water as low as 37°F and cools up to 12°F per hour. The Ice Barrel 500 is better value for beginners and ice users, because the barrel needs no power and the 1/2 HP Ice Barrel Chiller can be added later. Neither is better for everyone; it depends on how often you plunge and whether you can add a dedicated circuit.

Is the Ice Barrel 400 discontinued?

The Ice Barrel 400 is no longer listed on Ice Barrel's US site as of November 14, 2026, and its old product link redirects to the home page. Ice Barrel currently sells the Ice Barrel 300, the Ice Barrel 500 and the Ice Barrel Chiller. The Ice Barrel 500 is the current full-size model, holding 94 gallons and fitting users up to 6'9".

Can you put ice in a Plunge All-In?

No. The Plunge All-In residential warranty lists adding ice to the tub as a condition that voids the warranty. The Plunge All-In cools itself to as low as 37°F with its built-in chiller, so ice is not needed.

Does the Ice Barrel 500 need a chiller?

The Ice Barrel 500 does not need a chiller; it works with ice, and Ice Barrel says its R-16 insulation often holds water around 59°F without a chiller running. To hold a set temperature down to 37°F automatically, the Ice Barrel 500 needs the separate 1/2 HP Ice Barrel Chiller, which connects through the barrel's 3/4 inch chiller ports.

What electrical circuit does the Plunge All-In need?

Plunge's help center and residential manual call for a dedicated 120V, 20 amp circuit for the Plunge All-In, using the supplied GFCI cord and no extension cord. The Plunge All-In product page still says 15 amp, so plan for the stricter 20 amp requirement. The Ice Barrel Chiller, by comparison, lists about 115V with a 15 A fuse rating.

Which has the better warranty, Plunge or Ice Barrel?

Ice Barrel offers a limited lifetime warranty on the Ice Barrel 500 barrel, which its warranty page caps at 3 years, and 1 year on the Ice Barrel Chiller, with exclusions for fading, weather damage and delamination after the first year. Plunge offers 1 year on the whole Plunge All-In, including parts and labor, but voids it for missed filter changes, adding ice, out-of-date firmware or freezing without winterizing.

Sources we checked

Specifications were read from these documents on November 14, 2026. Makers change models; check the current manual before you buy.

  1. Plunge All-In Gen 2 product page, plunge.com (read Nov 14, 2026)
  2. Plunge tech specs comparison page, plunge.com
  3. Manual and Setup Guide for the Residential Plunge All-In, Plunge Help Center
  4. Plunge All-In Residential 1-Year Limited Warranty, Plunge Help Center
  5. Electrical Requirements for Plunge Cold-Plunge Models, Plunge Help Center (updated Nov 14, 2026)
  6. Caring for Your Residential Plunge All-In, Plunge Help Center
  7. Winterizing the All-In Residential, Plunge Help Center
  8. How the Gen 2 Plunge Chilling System Works, Plunge blog
  9. Ice Barrel 500 product page, icebarrel.com (Oct 2026 version)
  10. Ice Barrel Chiller product page, icebarrel.com (Oct 2026 version)
  11. Ice Barrel product warranty and Chiller limited warranty, icebarrel.com
  12. Ice Barrel FAQ, icebarrel.com
  13. Ice Barrel home page lineup, icebarrel.com (read Nov 14, 2026)
  14. Ice Barrel 400 product page, archived Oct 22, 2025 (Internet Archive)
  15. Plunge All-In Residential Safety Precautions, Plunge Help Center